Kia Soul: Special driving conditions / Driving in the rain, Driving in flooded areas
Driving in the rain

Rain and wet roads can make driving dangerous, especially if you’re not prepared
for the slick pavement. Here are a few things to consider when driving in the rain:
- A heavy rainfall will make it harder to see and will increase the distance
needed to stop your vehicle, so slow down.
- Keep your windshield wiping equipment in good shape. Replace your windshield
wiper blades when they show signs of streaking or missing areas on the windshield.
- If your tires are not in good condition, making a quick stop on wet pavement
can cause a skid and possibly lead to an accident. Be sure your tires are in
good shape.
- Turn on your headlights to make it easier for others to see you.
- Driving too fast through large puddles can affect your brakes. If you
must go through puddles, try to drive through them slowly.
- If you believe you may have gotten your brakes wet, apply them lightly
while driving until normal braking operation returns.
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake performance may be affected.
After driving through water, dry the brakes by gently applying them several times
while the vehicle is moving slowly.
Smooth cornering Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear ...
Driving off-road Drive carefully off-road because your vehicle may be damaged by rocks or roots of trees. Become familiar with the off-road conditions where you are going to drive before you begin driving. ...
Other information:
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop button to the ON position. - It remains on until the engine is started. When there is a malfunction with either the alternator or electrical charging system. If there is a malfunction with either the alternator or ...
1. After driving approximately 7~10 km ( 4~6 miles or about 10 minutes), stop at a suitable location. 2. Connect connection hose (10) of the compressor directly to the tire valve. 3. Connect between compressor and the vehicle power outlet using the cable and connectors. 4. Adjust the tire inflation ...