Kia Soul: Forward Collision-Avoidance Assist (FCA) system (Camera type) / System malfunction
- When FCA is not working properly, FCA warning light ()
will illuminate and the warning message will appear for a few seconds. After
the message disappears, the master warning light ()
will illuminate. In this case, have the vehicle inspected by a professional
workshop. Kia recommends to visit an authorized Kia dealer/service partner.
- FCA warning message may appear along with the illumination of the ESC
warning light.
WARNING
- FCA is only a supplemental system for the driver’s convenience. The
driver should hold the responsibility to control the vehicle operation. Do not
solely depend on FCA system. Rather, maintain a safe braking distance, and,
if necessary, depress the brake pedal to lower the driving speed.
- In certain instances and under certain driving conditions, FCA system
may activate unintentionally. Also, in certain instances the front camera recognition
system may not detect the vehicle ahead. FCA system may not activate and the
warning message will not be displayed.
- FCA may unnecessarily produce the warning message and the warning alarms.
Also, due to the sensing limitation, FCA may not produce the warning message
and the warning alarm at all.
- When there is a malfunction with FCA, the braking control does not
operate upon detecting a collision risk even with other braking systems normally
operating.
- FCA operates only for the vehicle in front, while driving forward.
It does not operate for any animals or vehicles in the opposite direction.
- FCA does not recognize the vehicle, which horizontally drives across
the crossroad, or the vehicle, which is parked in the horizontal direction.
- If the vehicle in front stops suddenly, you may have less control of
the brake system. Therefore, always keep safe distance between your vehicle
and the vehicle in front of you.
- FCA system may activate during braking and the vehicle may stop suddenly.
And the load in the vehicle may endanger passengers. Therefore, always be mindful
of the load volume in the vehicle.
- FCA system may not activate if the driver applies the brake pedal to
avoid risk of collision before FCA operation.
- FCA system does not operate when the vehicle is in reverse. In these
cases, you must maintain a safe braking distance, and if necessary, depress
the brake pedal to reduce the driving speed in order to maintain a safe distance.
- The regular braking function will operate normally even if there is
a problem with FCA brake control system or other functions. In this case, the
braking control will not operate in the risk of a collision.
- FCA system may not activate according to driving condition, traffic
on the road, weather, road condition, etc.
- FCA system may not activate to all types of vehicles.
In order for FCA system to operate properly, always make sure the sensor is clean and free of dirt, snow, and debris. Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance ...
FCA is an assistant system for a driver in a certain risky driving condition and it does not take every responsibility for all risks from driving condition. FCA monitors the driving situations through ...
Other information:
OFF With manual transaxle To turn off the engine (START/RUN position) or vehicle power (ON position), stop the vehicle then press the engine start/stop button. With automatic transaxle / dual clutch transmission To turn off the engine (START/RUN position) or vehicle power (ON position), press the engine ...
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch fluid, clean the area around the reservoir cap thoroughly to prevent brake/clutch fluid contamination. If the ...