Kia Soul: Manual climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a bad influence on the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by a professional workshop.
Kia recommends to visit an authorised Kia dealer/service partner.
WARNING
Vehicles equipped with R-134a*
Because the refrigerant is at very high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant is used.
Otherwise, it may cause damage to the vehicle and personal injury.
WARNING
Vehicles equipped with R-1234yf*
.png)
Because the refrigerant is mildly inflammable and at very high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant is used.
Otherwise, it may cause damage to the vehicle and personal injury.
Air conditioning refrigerant label
Each symbols and specification on air conditioning refrigerant label means as below ; 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of Compressor lubricant You can find out ...
Automatic climate control system
1. Driver`s temperature control knob 2. AUTO (automatic control) button 3. Front windshield defroster button 4. Rear window defroster button 5. Air conditioning button 6. Air intake control button 7. ...
Other information:
Kia Soul (SK3) 2020-2025 Owners Manual: Light bulb position (Front)
1. Front turn signal lamp (Bulb Type) 2. Headlamp (Low/High) 3. Position lamp/Daytime running lamp (Bulb Type) 4. Front turn signal lamp (LED Type) 5. Headlamp (LED)/Sub Low 6. Headlamp (LED) (Low) 7. Position lamp/Daytime running lamp (LED Type) 8. Front fog lamp (LED Type) 9. Front fog lamp (Bulb ...
Kia Soul (SK3) 2020-2025 Owners Manual: License plate lamp bulb replacement
1. Remove the lamp assembly by using a flat-blade screwdriver. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb from bulb-socket by pulling it out. 4. Insert a new bulb by inserting it ...
