Kia Soul: Remote keyless entry / Battery replacement
The transmitter or smart key uses a 3 volt lithium battery which will normally
last for several years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gently pry open the transmitter or smart
key cover.
2. Replace the battery with a new battery (CR2032). When replacing the battery,
make sure the battery position.
3. Install the battery in the reverse order of removal.
For transmitter or smart key replacement, Kia recommends to visit an authorized
Kia dealer/service partner.
CAUTION
- The keyless entry system transmitter is designed to give you years
of trouble-free use, however it can malfunction if exposed to moisture or static
electricity. If you are unsure how to use or replace the battery, Kia recommends
to contact an authorized Kia dealer/ service partner.
- Using the wrong battery can cause the transmitter or smart key to malfunction.
Be sure to use the correct battery.
- To avoid damaging the transmitter or smart key, don't drop it, get
it wet, or expose it to heat or sunlight.
CAUTION
An inappropriately disposed battery can be harmful to the environment and
human health.
Dispose the battery according to your local law(s) or regulation.
NOTICE The transmitter will not work if any of the following occurs: The ignition key is in the ignition switch. You exceed the operating distance limit (about 10 m [30 feet]). The battery in the transmitter ...
With a smart key, you can lock or unlock a door and even start the engine without inserting the key. The functions of buttons on a smart key are similar to the folding key. ...
Other information:
1. After driving approximately 7~10 km ( 4~6 miles or about 10 minutes), stop at a suitable location. 2. Connect connection hose (10) of the compressor directly to the tire valve. 3. Connect between compressor and the vehicle power outlet using the cable and connectors. 4. Adjust the tire inflation ...
To reduce the possibility of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position. To cancel or return to the defogging logic, do the following. Manual climate control system 1. Turn the ignition switch ...