Kia Soul: System operation / Air conditioning system operation tips
- If the vehicle has been parked in direct sunlight during hot weather,
open the windows for a short time to let the hot air inside the vehicle escape.
- To help reduce moisture inside of the windows on rainy or humid days,
decrease the humidity inside the vehicle by operating the air conditioning system.
- During air conditioning system operation, you may occasionally notice
a slight change in engine speed as the air conditioning compressor cycles. This
is a normal system operation characteristic.
- Use the air conditioning system every month only for a few minutes to
ensure maximum system performance.
- When using the air conditioning system, you may notice clear water dripping
(or even puddling) on the ground under the passenger side of the vehicle. This
is a normal system operation characteristic.
- Operating the air conditioning system in the recirculated air position
provides maximum cooling, however, continual operation in this mode may cause
the air inside the vehicle to become stale.
- During cooling operation, you may occasionally notice a misty air flow
because of rapid cooling and humid air intake. This is a normal system operation
characteristic.
Kia Air Conditioning Systems are filled with environmentally friendly refrigerant*. 1. Start the engine. Push the air conditioning button. 2. Set the mode to the position. 3. Set the air intake control ...
A : Outside air B : Recirculated air C : Climate control air filter D : Blower E : Evaporator core F : Heater core The climate control air filter installed behind the glove box filters the dust or other ...
Other information:
Jack and tools The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. 1. Jack handle 2. Jack 3. Wheel lug nut wrench Jacking instructions The jack is provided for emergency tire changing only. To prevent the jack from ...
1. Open the tailgate. 2. Remove the service cover. (Loosen the lamp assembly retaining screws and remove the lamp assembly from the body of the vehicle for back-up lamp) 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on ...