Kia Soul: Air bag - supplemental restraint system / Air bag warning and indicator

Kia Soul (SK3) 2020-2024 Owners Manual / Safety features of your vehicle / Air bag - supplemental restraint system / Air bag warning and indicator

Kia Soul. Air bag warning and indicator

The purpose of the air bag warning light in your instrument panel is to alert you of a potential problem with your air bag - Supplemental Restraint System (SRS).

When the ignition switch is turned ON, the warning light should illuminate for approximately 6 seconds, then go off. Have the system checked if:

The light does not turn on briefly when you turn the ignition ON.
The light stays on after illuminating for approximately 6 seconds.
The light comes on while the vehicle is in motion.
The light blinks when the ignition switch is in ON position.

Front passenger's air bag warning label for child restraint system

WARNING Never place a rear facing child restraint in the front passenger seat, unless the passenger-side air bag is deactivated. An inflating passengerside air bag could impact the rearfacing child restraint ...

Passenger’s front air bag ON indicator

❈ The actual indicator in the vehicle may differ from the illustration. The passenger's front air bag ON indicator illuminates for approximately 4 seconds after the ignition switch is turned to ...

Other information:

Kia Soul (SK3) 2020-2024 Owners Manual: Care of seat belts

Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. WARNING When you return the rear seatback to its upright position after the rear seatback was folded down, be ...

Kia Soul (SK3) 2020-2024 Owners Manual: Front fog lamp aiming

To aim the front fog lamp up or down, turn the driver clockwise or counterclockwise. Aiming point (Headlamp type A) Aiming point (Headlamp type B) Aiming point (Headlamp type C) Head lamp low beam (LHD Vehicle) 1. Turn the low beam on without driver aboard. 2. The cut-off line should be projected in ...